ROUTER TABLE FOR TRIM
I cut a lengthwise groove near the middle of the 2x, just a pinch larger than the depth and width of my molding stock. Then I used a hole saw to bore a 1-1/2-in.-dia. hole that is offset from the center of the groove. This hole accommodates the router bit, and it should be to the left of the groove as you face the jig. This is to ensurethat the router bit, which turns clockwise, will be turning into the work as you feed the stock into it. Next, I bored a similar hole in the top of my job-site workbench to allow the wood chips an escape route. I positioned my router over the hole in the jig and anchored the router to the table with a pair of clamps. The clamps were arranged on opposite sides of the router’s base, in line with the groove in the 2x stock.
For the original version including any supplementary images or video, visit http://www.finehomebuilding.com/item/14188/build-this-simple-router-jig-and-mill-your-own-molding-on-site
Router Table includes pre-drilled router mounting plates., Bosch Power Tools &
These jigs cut mortises, tenons, dovetails, and a whole lot more, but they simply cant perform all their operations without the use of a plunge router. 3. Ideal for Inlay Grooves The plunge router is ideally suited for stringing and delicate inlay work , often called captured inlay, because the plunge mechanism allows a smooth entrance and exit from the cut. Try tipping your fixed-base model into a cut like this and your cut will likely be misaligned right where the groove starts. This is one operation you definitely want to get right the first time, and a plunge router is the surest way to get the job done well. 4.
For the original version including any supplementary images or video, visit http://www.motherearthnews.com/diy/plunge-router-ze0z1210zwar.aspx
By using pre-drilled holes to attach a clamping strip, woodworkers can clamp the machine to nearly any horizontal surface for work. The table includes a 1/4-in. acrylic base pre-drilled to fit most compact routers.
For the original version including any supplementary images or video, visit http://www.woodworkingnetwork.com/wood-machinery-supplies/woodworking-equipment/router_table_for_trim_128444573.html
8 Great Reasons to Own a Plunge Router – DIY – MOTHER EARTH NEWS
The proximity of the rotary tool makes things even more tricky, but thankfully, once your tool is in place and youre used to the location of the paraphernalia on the underside, changing bits and calibrating the cut depth can be done by touch-feel alone, read more resulting less neck-ache. Click to enlarge As well as cut depth, youre able to adjust the angle of the guide bar and protective shield to your requirements, depending on the finish youre trying to achieve or the depth of material youre dealing with. The main limitation of the table is its size, which will limit the length of materials you can easily pass by/over the cutting/sanding bit. Click to enlarge Using sanding bands proved to be a doddle and we were able to achieve smooth curves on the corners of acrylic sheet much easier than with a rotary tool alone or with the Dremel Workstation. With soft materials, it was quick and easy to shave off a specific amount off one edge, while routing bits were able to deal with harder materials. Leaving the rotary tool and cutting bit to do most of the work, we didnt see any signs of flaws in the cuts due to tool movement; so long as you dont apply too much pressure, the Router / Shaper is able to provide clean, accurate cuts. Conclusion In reality, calibrating the Dremel Router / Shaper proved to be a bit of a pain, but its likely youll only have to do this once each time you come to do some routing. For sanding and shaping, it provides both a sturdy mount for your rotary tool, and an effective means of using sanding bands as well as a modest-sized worktable for these tasks.
For the original version including any supplementary images or video, visit http://www.bit-tech.net/modding/2012/03/13/dremel-shaper-router-table-review/2
Using the Dremel Shaper/Router Table and Conclusion | bit-tech.net
Bosch provides a complete line of corded and cordless power tools and accessories engineered to survive any jobsite and allow professionals to take control of their work. For more information, call toll free 877-BOSCH-99 (877-267-2499) or visit http://www.boschtools.com . About Bosch North America: In North America, the Bosch Group manufactures and markets power tools and accessories, automotive original equipment and aftermarket products, industrial automation and mobile products, security technology, thermo-technology, packaging equipment and household appliances. Bosch employs 22,700 associates in more than 80 primary and 20 associated facilities throughout the region with reported sales of $8.4 billion in 2005.
For the original version including any supplementary images or video, visit http://news.thomasnet.com/fullstory/Router-Table-includes-pre-drilled-router-mounting-plates-487689